Glade Automatic Spray Starter Kit with Refill and Batteries 6.2 oz.
Fall into Savings! Shop More
Clean Linen Automatic Spray
Quickly fills the room with fragrance for up to 60 days*
*When set to 36 minute setting
Automatically Freshens throughout the day.
Eliminates Odors and creates an inviting home.
Time release spray
Set for 9, 18, or 36 minutes.
Boost Button for extra fragrance anytime! Product Features
- Scratch breathe & feel
Learn more at: www.scjohnson.com
Visit us at www.glade.com
Box - Recyclable
Steel can is recyclable
Paperboard Packaging is recyclable
Paperboard Packaging contains 35% post consumer recycled material
Steel - Please recycle when empty.
S.C. Johnson & Son, Inc.,
Racine, WI, 53403-2236,
All Rights Reserved.
Warning Text: Caution: contents under pressure. Eye irritant. Caution: contents under pressure. Contains propellants. Do not expose to heat or store at temperatures above 120 F. do not puncture or incinerate container. Eye irritant: contains acetone. Avoid contact with eyes. First aid: eyes: immediately rinse eyes with plenty of water for at least 15 minutes. If irritation persists, get medical attention. Do not use in small confined pet areas without adequate ventilation. Keep out of reach of children And pets.
Ingredients: Propellant, Fragrance, Carriers: Isoalkanes, Acetone
Instructions: . How to use. Open. Press button at top, while pulling sides of holder apart. When unit is open, always make sure timer is set to Off position and keep spray nozzle pointed away from your face at all times. Activate. Open unit. Pull out red tab to activate batteries. Insert. Remove the cap from the can and insert the can with the spray nozzle facing out. Turn the unit on by selecting your desired time setting in minutes. Close the unit. Set. A spray will occur at the selected time interval. For an instant burst of Glade fragrance anytime, press the boost button on the back of the unit. Important:. Remove the cap from the can and insert the can with the spray nozzle facing out. How to hang:. 1. insert screws into wall (screws not included). 2. mount unit onto screws. . Replacing the batteries. Open unit and remove the can to access the batteries. Remove old batteries and replace with two new alkaline AA batteries. Replace can, set timer, and close unit.